Thoroughly clean both the removed overflow cover and the area around it. Next, prepare your cleaning supplies, such as a mild cleaner and a cloth or sponge. If the gasket is damaged or deteriorated, it’s advisable to replace it to maintain a watertight seal. This is also a good time to examine the gasket, which is the rubber or silicone seal around the cover. Once the cover is off, set it aside, and take a moment to inspect it for any visible damage or signs of wear. If the cover is stuck or doesn’t come off easily, you may need to use pliers in the next step to aid in its removal. Gently lift the cover away from the bathtub wall, taking care not to damage it or the surrounding area.

Step 6: Remove and CleanĪfter successfully loosening the bathtub overflow cover, it’s time to remove it from its position. If the cover doesn’t come off easily, use pliers to grip the edge of the cover and continue turning counterclockwise until it’s completely removed. The combination of the notch and the counterclockwise pressure should gradually release the cover, making it easier to remove in the following steps. The counterclockwise motion is essential as it loosens the overflow cover from its secured position.īe patient and avoid using excessive force, as you don’t want to damage the cover or the surrounding bathtub area. Now, apply gentle pressure in a counterclockwise direction. Ensure that the screwdriver is securely positioned in the gap. Using your flathead screwdriver, gently insert it into the identified notch or gap along the edge of the screwless bathtub overflow cover. With the notch located, it’s time to carefully proceed to the next step. Step 3: Insert the ScrewdriverĬarefully insert the flathead screwdriver into the notch, ensuring it’s securely positioned.

Once you’ve successfully located the notch, you can proceed to the next step of inserting the screwdriver and beginning the removal process. Identifying this notch is crucial, as it’s the key to gently prying open the overflow cover and accessing the components underneath. You should be able to spot a slight indentation or gap that serves as the access point for removal. Take a close look at the perimeter of the overflow cover, paying particular attention to the area where it meets the bathtub’s wall. This notch is where you’ll insert your flathead screwdriver to begin the removal process. They are typically held in place by friction or clips and require a different approach for removal.Īfter identifying that your bathtub overflow cover is of the screwless type, the next step is to locate the small notch or gap along its edge. Screwless: Screwless overflow covers, as the name suggests, do not have any visible screws.In this case, you’ll need to locate and remove these screws before proceeding with the removal. With Screws: Some overflow covers are secured in place with small screws.There are two common types of overflow covers: To begin the process of removing your bathtub overflow cover, it’s essential to determine its type. Cleaning Supplies: You’ll need cleaning supplies such as a mild cleaner and a cloth or sponge to clean the overflow cover and the area around it.įollow these steps to remove your bathtub overflow cover: Step 1: Identify the Type.This ensures a watertight seal when you reassemble the cover. Replacement Gasket: It’s a good idea to have a replacement gasket on hand in case your existing one is damaged or worn out.Pliers: Pliers are essential for gripping and turning the overflow cover, especially if it’s stubborn and doesn’t come off easily.It will assist you in prying open the cover. Flathead Screwdriver: Even though we’re dealing with a screwless cover, a flathead screwdriver can be helpful in the removal process.

Here’s a list of items you’ll require to successfully remove your bathtub overflow cover with no screws: Over time, these covers may get dirty, damaged, or simply need replacement. The overflow cover is located underneath the bathtub’s faucet and serves as a safety feature to prevent water from overflowing when you fill the tub. Understanding the Bathtub Overflow Coverīefore we get into the removal process, let’s briefly understand what a bathtub overflow cover is and why it’s essential.

Bathtub overflow cover screws rusted